Reliable Fuel Management for a Data Centre’s Backup CHP Installation

Summary

A data centre may require a reliable diesel fuel management system to support a standby CHP installation providing backup power during grid outages. As fuel can remain in storage for extended periods, a fuel handling solution incorporating transfer, conditioning and level monitoring equipment could help maintain fuel quality and ensure fuel availability whenever the CHP plant is called upon.


Project Overview

  • Industry: CHP & Energy Generation
  • Application: Data Centre CHP
  • Fuel: Diesel
  • Transfer Duty: Approx. 1,500 l/h system requirement
  • Transfer Distance: 50m
  • Vertical Lift: 10m
  • Operation: Backup Power Generation

Project Requirements

  • Transfer diesel from bulk storage to day service tanks.
  • Support a standby CHP installation with an approximate fuel demand of 1,500 l/h.
  • Manage fuel transfer over a 50m run with a 10m vertical lift.
  • Maintain fuel quality during extended storage periods.
  • Provide automatic day tank filling control.
  • Monitor high and low tank levels.
  • Detect water contamination within stored fuel.
  • Supply clean fuel to CHP generators on demand.
  • Automatically switch between service tanks.
  • Support reliable fuel availability during emergency operation.

The Challenge

Unlike continuously operating power generation systems, standby CHP installations may store fuel for long periods without significant consumption. Over time, water ingress and fuel contamination can affect fuel quality, increasing the risk of operational issues when generation is suddenly required.

The facility would therefore require a solution capable of maintaining clean fuel, monitoring storage conditions and ensuring fuel could be delivered automatically whenever the CHP plant is called into service.


Equipment and Solution

In this proposed arrangement, diesel would be stored within a client-supplied bulk storage tank and transferred to dual day service tanks using an FP 240 Oil Transfer Pressure Unit. Rated at 2,100 l/h, the FP 240 could provide sufficient capacity to support an installation requiring approximately 1,500 l/h whilst offering additional operational margin.

Day tank operation could be managed using SMMR Level Switches. Configured to provide maximum and minimum level monitoring, the switches could automatically control tank filling operations and can be used to control pumps and solenoid valves as part of the fuel management strategy. Optional water detection functionality could also help identify water ingress within stored diesel.

To maintain fuel quality, a dedicated MiniSAFA Fuel Conditioning System could continuously circulate and polish stored diesel. The system helps remove water and contaminants that may accumulate during prolonged storage periods, supporting fuel quality in standby power applications.

Conditioned fuel would be supplied from the day service tanks to the CHP generators via a dedicated secondary transfer pump. Inpro Solenoid Valves could be used to control fuel routing and automatically select the active service tank based on operating requirements and tank status.

The proposed arrangement would be designed to support automated fuel transfer, fuel quality management, tank level monitoring and service tank changeover, helping ensure the CHP installation remains prepared for backup power operation.


Equipment Breakdown

FP 240 Oil Transfer Pressure Unit

  • Flow rate: 2,100 l/h
  • 400V power supply
  • 2.2 kW motor
  • IP55 motor protection

SMMR Level Switches

  • Maximum and minimum level control
  • Controls pumps and solenoid valves
  • Optional water detection functionality
  • Suitable for automated tank filling and emptying operations

MiniSAFA Fuel Polishing System

Image of MiniSAFA in cabinet
  • Recommended for tanks up to 50,000 litres
  • Nominal flow: 40 l/min
  • Maximum flow: 50 l/min
  • Fuel conditioning and water separation

Inpro Solenoid Valves

  • Automatic tank changeover
  • Fuel routing and flow control
  • Supports dual day tank operation

Equipment List


Get in touch today

Whether supporting CHP installations, standby generators or critical infrastructure, Anglo Nordic provides fuel transfer, conditioning and fuel management solutions that can be configured to support reliable backup power applications.

Let's talk

If you’d like to discuss this article, or any of our solutions, please just get in touch using any of our contact methods.

Share This Post

More To Explore